«
»

IPAQ Cradle Mod

How you can use your IPAQ 5450 Carddle to connect anything to your IPAQ.

Connector Pin out:

h5450 Pinout
  1. V_ADP
  2. V_ADP
  3. V_ADP
  4. V_ADP
  5. Reserved
  6. RS232 DCD
  7. RS232 RxD
  8. RS232 TxD
  9. RS232 DTR
  10. GND
  11. RS232 DSR
  12. RS232 RTS
  13. RS232 CTS
  14. RS232 RING
  15. GND
  16. (NC) No Connect
  17. USB Detect
  18. NC
  19. USB – UDC +
  20. NC
  21. USB – UDC -
  22. GND

How to find the pin-numbers?

Pin Search 2Pin Search 1

All you need is a DVM with Resistance Measurement and a small copper wire (with un isolated ends). The rest is precise work. To get the correct pin i used my digicam to photograph the wire, zoomed into the picture on my display and counted if the wire is placed correct. Then with the DVM you can find the corresponding pin on the other side.

This entry was posted on Sunday, November 12th, 2006 at 11:48 and is filed under other. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Leave a Reply