Tobi’s Corner

Here you can see my IKEA Storm Lamp Mod using the powerRGB circuit and the tinyRGB firmware.

First . Here are the steps:

1. Assemble the lamp but leave the paper shield down
2. Remove the contacts from the bulb’s holder:
   
3. Now open the holder
   
4. Build the powerRGB circuit on a PCB that fits the inner of th mounting:
   
5. Solder some power supply cables to the PCB and pull them though the mounting down to the lamps base and put the PCB into the holder:
   
6. So thats it. Now reassemble the lamp with shield and connect a propper power supply to the board.
7. The most important step: Re-Design the Box:
   
8. Here some Images under Day-Light conditions:
   
9. And when darkening the room:
   
10. Enjoy your FÄRGRANN

Tags: AVR, LED, power, PWM, RGB

This entry was posted on Friday, January 5th, 2007 at 18:18 and is filed under LED stuff, tinyRGB. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.