Tobiscorner

synchronise AVR clock using the Network Time Protocol (NTP)

For my 7-segment display AVR clock i was searching for a way to keep the clock accurate. One option would be using a DCF77 standard time receiver. The module I had seemed to be broken so I decided to use an ethernet interface and NTP.

Continue reading Comments (1) 24.03.2008. 12:26

avrTer

AVRTer is not only a Terminal Emulation for AVR, it's a Terminal build with an AVR.

Continue reading Comments (0) 12.11.2006. 11:40

avrDotmatrix

avrDotmatrix uses a 5x7 dotmatrix display and an ATMega8 to create a nice display with scrolling!
avrDotmatrix - Is a 5x7 LED Matrix Display controlled by a ATMega8 to display scrolling text, time or temperatures. The pattern is generated with multiplexing the 5 matrix columns and setting the correct row bits.

Continue reading Comments (6) 12.11.2006. 11:37

avrCCD

avrCCD is an Interface to TSL1401 128x1 Linear Sensor Array with Hold.

Continue reading Comments (10) 11.11.2006. 19:32

AD9833 / AD5932 Interface

This project describes howto create a waveform generator with an AVR Microcontroller and an Analog Devices DDS circuit.

Continue reading Comments (16) 11.11.2006. 19:09